MOTUL 2-Stroke Semi-Synthetic 510

510 2T is a 2-stroke engine oil based on MOTUL- Techno synthesis for modern 2T motorcycle engines for normal stresses in everyday use in all 2-stroke engines with injection or carburettor. Suitable for both mixed and separate lubrication. Compatible with modern exhaust aftertreatment systems.

SPECIFICATIONS/STANDARDS:
STANDARDS: API TC, ISO-L-EGD
APPROVALS: JASO FD N° M033MOT065

JASO (Japanese Automobile Standards Organization) has developed its own standard for 2-stroke motorcycle engine oils, JASO M 345, which classifies the different qualities with the gradations FB, FC, FD with the aim of improving the performance of two-stroke oils. The JASO M 345 assesses the quality of the engine oil according to the following four criteria: Lubricity, Low Smoke Combustion, Engine Cleanliness, Exhaust System Clogging. JASO FD is a very high performance level.
ISO (International Organization for Standardization) L-EGD corresponds to the requirements of JASO FC only in the evaluation of the cleaning power of the oil stricter criteria are set. ISO L-EGD describes the currently highest performance level for 2-stroke engine oils.

ADVANTAGES:

• Pre-dissolved 2-stroke engine oil allows a fast and stable fuel/oil mixture.
• Perfect lubricating properties reduce friction losses and provide reliable wear protection even in high speed ranges and under high thermal load.
• Low smoke and low ash combustion.
• Excellent cleaning properties keep pistons and the entire engine components clean. This prevents deposits and coking in the combustion chamber, spark plugs and exhaust system.
• Prevents piston rings from sticking.
• Good visibility in the fuel/oil mixture due to green colouring.
• Available in the practical resealable 1-liter can with filler neck, dosing scale and viewing strip, making it easier to refill the oil or premix.

RECOMMENDATIONS AND NOTES:
Before use, be sure to observe the manufacturer's service documents and recommendations! Mixing ratio for mixture lubrication from 2% to 4% (50:1 to 25:1) or as specified by the manufacturer.

PROPERTIES:
Colour (visual) green
Density at 20°C ASTM D 1298 0.858
Viscosity at 100°C ASTM D 445 8.2 mm²/s
Viscosity at 40°C ASTM D 445 66.5 mm²/s
Viscosity index ASTM D 2270 142
Pour point ASTM D 97 -27°C
Flash point ASTM D 92 92°C
TBN ASTM D 2896 1.1 mg KOH/g