MOTUL 4-Stroke Semi-Synthetic 5000 10W30 Engine Oil (1L)

MOTUL 5000 4T 10W-30 is a 4-stroke multigrade engine oil based on HC-TECH® for motorcycles for which semi-synthetic engine oils should be used according to the manufacturer's recommendation. Specially developed oil with adapted additives for the transmission. Meets the requirements of motorcycle manufacturers e.g. HONDA, YAMAHA, which prescribe the viscosity SAE 10W-30. Suitable for motorcycles in normal everyday use.

SPECIFICATIONS/STANDARDS:
STANDARDS: API SL / SJ / SH / SG
APPROVALS: JASO MA2 N° M033MOT152

JASO (Japanese Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils, JASO T 903. The gradations MA, MA1 and MA2 facilitate the selection of motorcycle engine oils specifically designed for wet clutches. JASO MA2 stands for the highest friction values and thus for optimum clutch compatibility during gear changes, during the acceleration phase and also at consistently high speeds.

ADVANTAGES:

• Year-round usability.
• Optimized content of sulphur and phosphorus ensure long-term functioning of catalytic converters.
• High wear and corrosion protection.
• Low oil consumption tendency.
• The easy-running viscosity enables rapid oiling even in the starting phase, reduces critical cold-start wear and is ideally suited for hydraulic tappets.

RECOMMENDATIONS AND NOTES:
Change interval according to vehicle manufacturer's specifications or adjusted according to operating conditions. Before use, be sure to observe the manufacturer's service documents and recommendations!

PROPERTIES:
Colour (visual) brownish
Viscosity SAE J 300 10W-30
Density at 20°C ASTM D 1298 0,868
Viscosity at 100°C ASTM D 445 11,2 mm²/s
Viscosity at 40°C ASTM D 445 73,1 mm²/s
Viscosity index ASTM D 2270 145
Pour point ASTM D 97 -33°C
Flash point ASTM D 92 228°C
TBN ASTM D 2896 7 mg KOH/g